Geelong · 21km from Geelong

Concreting in Torquay

Torquay is beachside and high-growth, full of new builds, holiday homes and feature driveways. The brief here is often an exposed-aggregate or coloured driveway that takes the salt and looks the part, on a slab sized to the coastal ground.

No travel surcharge. Torquay is within 35km of Geelong.

Local concreting in Torquay

What moves the price out here.

Serving Torquay and the surrounding streets

Larger map

Beachside new builds, architectural homes and holiday stock, where exposed-aggregate and coloured driveways are the norm, the finish and the sealing are judged hard, and the coastal exposure drives the spec.

  • Direct coastal salt exposure, sealed and durable finishes
  • Exposed-aggregate and coloured driveways for high-end new builds
  • Owner-builders and new homes wanting the spec named on the quote

Why Torquay slabs spec differently

Torquay is beachside, growing fast, and full of new builds, holiday homes and architectural rebuilds. The salt-laden southerly that scrubs the Bellarine coastline does to a slab what it does to a Colorbond fence: it finds the part of the spec that was skimped and shows you in three summers. A Torquay job is not a Geelong job poured 21 km closer to the sand. The mix, the sealer and the finish all need to suit the coast.

The local factors that move a quote

  • Direct coastal salt exposure. Salt aerosol finds reo through hairline cracks and rusts it from the inside out, which is what blows the edge of a coastal slab apart. We hold the cover over the reo, name the MPa at the upper end of the band (N32 not N25 for exposed slabs), and seal decorative finishes with a coastal-grade penetrating sealer named on the quote.
  • Sandy and reactive ground side by side. Torquay blocks can run sandy near the dunes and back to reactive clay only a couple of streets inland. We classify the site before we commit to a thickness and a mesh, because a slab sized for sand on a clay block heaves, and a slab sized for clay on sand sometimes cracks for the wrong reason. The classification is on the page.
  • Architectural finishes judged hard. Most Torquay jobs are a feature driveway or an entertaining area where the finish is the look of the front of the house. Exposed aggregate in a basalt or honey-toned stone, honed finishes, and coloured stencil work all live here, and the colour and the stone are picked from the sample range, named on the quote, and sealed properly so they hold the look against the UV and the salt.

What we confirm before we pour

A lot of Torquay work runs alongside a new build, so we coordinate the slab with the builder’s program, the crossover with the Surf Coast Shire spec, and any feature finish with the landscaper. We confirm the council overlay, the crossover permit, and the sealing schedule before any concrete goes down. The coast is hard on a slab that was poured first and thought about second, so we think about it first.

Proof · recent work

Recent work across Geelong.

A finished exposed-aggregate driveway leading up to a Highton brick home on a sloping reactive-clay block
The same Highton home before, with an old cracked and lifted plain-grey driveway slab
Before After
Cracked, lifting driveway to exposed-aggregate, Highton. A cracked, lifting old driveway on a reactive-clay Highton block, replaced with an exposed-aggregate driveway on a compacted base and heavier mesh.
A finished new-build house slab on a reactive-clay Armstrong Creek block, edge beams and float finish visible
The same Armstrong Creek block before the pour, bare reactive-clay ground excavated and graded
Before After
Bare site to finished house slab, Armstrong Creek. A new-build house slab on a reactive-clay Armstrong Creek block, designed to AS 2870 off a site classification with the footings, reo and vapour barrier named on the quote.
A finished broom-finish side path running down a narrow Newtown side passage, control joints sawcut to spacing
The same Newtown side passage before, with an old cracked plain-grey side path and moss along the wall edge
Before After
Cracked side path to broom-finish path, Newtown. A cracked old side path replaced with a broom-finish path on a Newtown block, set out to fall for drainage with control joints cut for grip.
Reviews

What Torquay homeowners say.

★★★★★
“Replaced the whole driveway in plain broom finish on a budget, but they did not skimp the base or the reo, only the finish. Old slab carted away, tip fees itemised, no extras at the end. A block from the water and they spec'd it for the coastal site.”
— Helen & Rob K., Torquay
via Google · Nov 2025
Local questions

Concreting in Torquay, answered.

Do you charge extra to come to Torquay?
No. Torquay is within 35km of our Geelong base, so there is no travel or concrete float surcharge. The free measure and the by-the-m² quote are the same whether you are around the corner or at the edge of the radius.
How soon can you pour my slab in Torquay?
We aim to be on site for a free measure within 48 hours and to have the written quote back to you within one business day of measuring. The pour itself depends on the size, the site classification and concrete supply, and we will give you a realistic window on the quote. Most residential driveways are a two to four day job once we start, with the cure on top, and wet or cold weather can move pour days.
Will the slab hold in the ground around Torquay?
Only if the base and the reo are right, which is exactly what we do. We check the soil and the falls on the measure and classify the site under AS 2870, then size the slab thickness, the mesh and the footings to it, with a compacted base under the slab and control joints cut. A slab poured thin over loose fill cracks and lifts within a couple of summers, so the base and footings are the part our 10-year guarantee covers.
Can you work with our body corporate or owner-builder build in Torquay?
Yes. We are used to townhouse, duplex and new-build driveways and slabs where a body corporate, a builder or an owner-builder has to sign off the spec, the finish and the cost. We give you a clear itemised by-the-m² quote you can put in front of the committee or the builder, with the thickness, the mesh and the MPa named, plus the AS 2870 design where the slab is structural, so the approval is the easy part.
Get started

Get a quote for your Torquay job.

Tell us what you need. We’ll book a walkthrough and send a quote with the work itemised, not just a number.

✓ VBA Registered✓ Slabs to AS 2870✓ Licensed & insured✓ 130 five-star reviews✓ 10-year slab & footings
Price my slab Call